BEST 9K Series Locksets - 93K
Heavy Duty Grade 1 Cylindrical Locks
Features:
- For versatile applications, lever by knob trim variations available
- Interchangeable core allows for quick re-keying and customized masterkeying
- Strong through-bolt mounting studs increase torque resistance
- Heavier rose liner material is highly attack resistant
- Stronger retractor springs provide resistance to lever sag
- New zinc hubs with a shrouded locking lug, guarantees higher quality and increased torque resistance
- Rose locking pin and rose assembly design offers great torque resistance. It prevents the locking pin from twisting, bending, or breaking under attack
- The innovative design of the slotted key release cam and locking lug assembly create maximum attack resistance
- The outside lever sleeve is a seamless one-piece construction made of a hardened steel alloy that provides additional reinforcement in the locking lug slot
- ALL LOCKSETS ARE LESS CORE
Torsion Spring (vs. compression) mounted in hub - helping to prevent lever sag and creating for a smoother, “snappier” operation of the lockset.
The BEST interchangeable core allows quick re-keying and customized masterkeying.
Rose locking pin and rose assembly design offers great torque resistance. It prevents the locking pin from twisting, bending, or breaking under attack. Slotted key release cam and locking lug assembly increases torque resistance, and creates fail-secure outside features. This also allows fail-safe on the inside lever and fail-secure on outside lever with key override.
|
Backset: |
2¾" standard |
Chassis:
|
Critical latch and chassis components are brass or corrosion-treated steel. 2-1/16" diameter to fit 2 ⅛" hole in door(conforms to ANSI A1152.2)
|
|
Door Thickness: |
Available for 1¾" to 2¼" doors. Door thickness must be specified |
|
Latch: |
9/16" throw. Front: 2¼" x 1⅛" beveled |
|
Lever Handles: |
Lever handles are a high quality zinc alloy. Trim components are brass or bronze.
Body is approximately 1⅝" in diameter; Handle is approximately 4¾" long (from center-line of chassis). #14 and #15 levers conform to California Administrative Code Title 19 and Title 24. All three styles of levers conform to the Illinois Accessibility Standard. |
|
Mounting: |
In addition to standard door preparation (ANSI A115.2 for 1¾" doors), two additional holes are needed for through-bolt. Through-bolts require two 5/16" diameter holes located at 12 o'clock and 6 o'clock positions. A drill jig is provided to ensure accuracy of the holes. |
|
Projection on Door: |
Approximately 2¾" when mounted on 1¾" door |
|
Roses: |
C - 3" convex, D - 3-1/2" convex, K- 3" convex no-ring, L- 3-1/2" convex-no ring |
|
Strike: |
STK: 2¾" standard
S3: Conforms to ANSI A115.2 for 1¾" doors (4⅞") x 1¼
" with curved lip) |
