Bobrick B-6806
1-1/2" Diameter
Stainless Steel Grab Bar with Snap Flange
- Grab Bar: 18-8 S, type-304, 18-gauge (1.2mm) stainless steel tubing with satin-finish. 1-1/2" outside diameter. Clearance between wall and grab bar is 1-1/2" (38mm).
- Ends of grab bar pass through concealed mounting flanges and are heliarc welded to form one structural unit.
- Cover snaps over mounting flange to conceal screws.
- Grab bar can support loads in excess of 900 pounds (408-kg) when properly installed.
- Meets ADA Accessibility Guidelines in U.S.A.
Concealed mounting flange 1/8" (3mm) thick stainless steel plate, 2" W x 3-1/8" H (50 x 80mm), with two screw holes for concealed anchors.
Cover is 22-gauge (0.8mm) stainless steel with satin-finish, 3-1/4" (85mm) diameter.
All joints and supports are contour cut and welded.
Concealed anchors and fasteners available as an optional accessory. |
