Bradley Sensor-Operated Hand Dryer
2869-28
FEATURES
- Quickly dries hands in 15 seconds or less
- Cuts normal dry time by 50%
- Offers a 90% to 95% cost savings over paper towels
- Stamped steel with white epoxy coat cover
- Sensor operated
- Surface mounted
CONSTRUCTION
- COVER: Fabricated of Stamped Steel with Epoxy Coat.
- NOZZLE: Fabricated from rust and corrosion-free diecast zinc with chrome-plated finish. Fixed nozzle.
- MOTOR: Is Universal type, 1/6 HP, 12,000 RPM at rated load with resilient mountings and sealed, permanently lubricated ball bearings for durability and rapid drying. 115 volt, 20 amp, 60 Hz, 2300 watt standard.
- HEATING ELEMENT: Mounted at air exit for maximum heating efficiency.
ELECTRONIC CONTROL:
Reflective infrared sensor detects hands, initiates and terminates drying.
- BLOWER: 275 CFM dynamically balanced wheel for vibration-free running.
- BASE PLATE: Fabricated of rust-free diecast aluminum; media burnished to bright finish.
- AIR INLET: Positioned on bottom of cover. Inlet covered by expanded steel grillwork.
- COVER LOCKING: Two detent rods secured by 1/4" diameter socket head safety screws; special wrench provided
Overall Dimensions: 11-5/8"W x 9-7/8"H x 6-5/8"D (8-1/4" at nozzle tip)
