Tell 500 Series
Standard-Duty Grade 3 Surface Applied Door Closers
540 with Backcheck & Parallel Arm Bracket
Standard Features
|
Certification
|
|
ANSI A156.4, Grade 3
500,000 cycles
UL listed
|
Chassis/Closer
|
|
Non-handed, cast aluminum, mounting to regular, top jamb or parallel arm applications
|
Main Arm
|
|
Stamped steel, accommodates reveals up to 3-1/4", adjustable extension arm
|
Spring Power
|
|
Adjustable 3 - 6 sizes
|
Backcheck
|
|
Adjustable, hydraulic - providing cushioning and preventing uncontrolled openings of the door
|
Valves
|
|
Adjustable, independent, non-critical (sweep and latch), consistent
closing speeds
|
Fasteners
|
|
Compatible for aluminum, hollow metal and wood doors and frames
|
| Door Range |
|
Up to 180 degrees |
| Door Preparation |
|
9-1/16" horizontal and 3/4" vertical mounting hole locations
(retrofits traditional closer) |
| Warranty |
|
10 years limited |
Optional Plunger Hold Open (PHO) Arm:
- Complete hold open arm assembly with forged steel main arm, flatform articulating adjusting arm, and rod and shoe
- Provides positive single point hold open adjustable from approximately 80 degrees to 135 degrees
Door Sizing Chart
|
Recommended
|
|
Opening force 5 lbs. on interior and 8.5 lbs. on exterior doors
|
|
