Specializing In Hospital Institutional Hardware

According to a report issued by the Associated General Contractors of America, health care construction was up 4 percent in 2008. Construction of new hospitals and new medical offices or renovations on existing facilities require particular hardware. General Contractors depend on vendors like Quality Door & Hardware to procure hardware to meet standards in medical and acute care facilities construction.

Aluminum, brass, bronze, stainless steel,  push and pull plates are items medical institutions commonly change and contractors need in their supply chain. Grab bars that need to support loads in excess of 900lbs are stocked and available for immediate delivery. Fire-rated and non-fire rated Exit devices are required in numerous locations throughout the building to comply with life safety code, along with specific related hardware, such as closers and locksets.

If you have any particular hardware needs and require some assistance, please call (800) 992-3667 (door). We carry a full-line of architectural hardware from a large list of manufacturers and are happy to assist you today!

Norton Commercial door Closers in stock and ready to ship @ www.qualitydor.com

Door Closers are labeled as to how much traffic they are designed to endure before needing replacement. This allows you the opportunity to adjust the power of the unit. This is also known as torque. When you increase the amount of power to control the door, it allows one to control the door with reduced speed.

Norton 8500 Series Closer
Norton 8500 Series Closer

Quality Door and Hardware carries Norton Door Closers. Door Closers by Norton allow you to choose the specification needed to manage the traffic of the door. Before installation, a point to consider is the amount of traffic expected.  Grade 1 closers are designed to endure high traffic areas and are typically used for main entrances of most businesses. These closers are generally used between 300-400 times a day and can last for three to seven years before replacement. Grade 2 closers are designed for medium traffic in a commercial application. These types of closers need a minimum of two valves to control the speed of the door. The first valve controls is called the sweep. When adjusting a closer, the ideal target time needed for the door to close is about six seconds.  For exterior applications we recommend a closer with a back-check feature.

For more information on Norton  Door Closers   call Qualitydoor.com at 800.9992.3667 or email us sales@qualitydoor.com

Pemko Continuous door hinges for every application. www.qualitydoor.com

Pemko continuous door hinges distribute load stress uniformly along the full length of the door and frame. The gear design of a continuous hinge ensures identical operation of each leaf therefore very little effort is used to open heavy commercial doors. A continuous hinge’s screws are located along the door hinge jamb. The continuous hinge acts as a reinforcement for both the door and frame. A remarkable degree of security can be achieved for exterior opening or restricted spaces by constructing a full length channel cap the common gap is sealed, which provides security against prying.

Qualitydoor.com stocks a large inventory of Pemko Continuous door hinges in 83″ and 95″ heights. We stock Cfm83, Cfm95, Cfs83, Cfs95, Dfm95, Dfm83, model numbers just to name a few.

Qualitydoor.com is Veteran owned and operated since 1988. Call 800.992.3667 for assistance with all your commerical door hardware inquiries or email us sales@qualitydoor.com