Bobrick B2111 Classic Series Vertical Surface-Mounted Soap Dispenser

SKU: B2111
$63.03
Weight: 2.06 LBS
Bobrick

Call us: 1-800-992-3667

FACTORY LEAD TIMES
MAY VARY

Actual products may differ
slightly in appearance
to images shown.

Details

Details

The B-2111 Classic Series surface-mounted soap dispenser has a corrosion-resistant valve and dispenses commercially marketed all-purpose hand soaps. The vertical tank is satin-finish stainless steel, has an easy to view refill window


Features

  • Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps
  • Vertical tank is satin-finish stainless steel
  • Soap refill window
  • Concealed wall fastening; hinged filler-top requires special key to open
  • Vandal-resistant
  • Valve operates with less than 5 lb of force (22.2 N)

Specifications

Materials: Container - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Body is drawn, one-piece, seamless construction. Back plate has mounting bracket attached. Furnished with concealed wall plate. Equipped with a clear acrylic refill-indicator window and a locked, hinged stainless steel lid for top filling
Valve - Black molded plastic push button and spout. Soap head-holding mushroom valve. Stainless steel spring. U-packing seal and duckbill. Antibacterial-soap-resistant plastic cylinder
Operation: Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps. To prevent corrosion of the tank, use only chloride-free pH-neutral liquid soaps. Valve is operable with one hand, without tight grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in the U.S.A.). Window indicates when refill is required. The locked, hinged lid opens for top filling only with special key provided. Concealed, vandal-resistant mounting
Size: 4-3/4" (120mm) w x 8-1/8" (205mm) h x 3-1/2" (90mm) d
Capacity: 40-fl oz (1.2-L)
Installation: Secure wall plate to the wall with three sheet-metal screws, furnished by manufacturer, at points indicated by an S. Slide mounting bracket of container down onto wall plate and secure unit with furnished locking-screw. For plaster or dry wall construction, provide concealed backing to comply with local building codes and secure with sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts
Note: Provide Surface-mount the dispenser plumb and true with valve 6" (150mm) to right or left of lavatory center. Provide 4" (100mm) minimum clearance from the lid to the underside of any horizontal projection. Push buttons should be located 44" (1120mm) maximum above the finish floor

Certifications

Barrier-Free Code Compliance: Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)