Bobrick B277 ConturaSeries Surface-Mounted Waste Receptacle with LinerMate

SKU: B277
$293.42
Weight: 15.84 LBS
Bobrick

Call us: 1-800-992-3667

FACTORY LEAD TIMES
MAY VARY

Actual products may differ
slightly in appearance
to images shown.

Details

Details

Bobrick B-277 contoura Series Surface Mounted Waste Receptacle with LinerMate has satin finish stainless steel, reccessed finger grip on bottom of receptacle and is furnished with LinerMate Trash Liner Holder


Features

  • Satin-finish stainless steel
  • Top edges are hemmed
  • Bottom of waste receptacle has recessed finger grip for safe handling
  • Furnished with LinerMate Trash Liner Holder
  • LinerMate facilitates installation and removal of disposable can liners
  • LinerMate retains can liner inside waste receptacle

Specifications

Materials: Receptacle - 18-8 S, type-304, 20-gauge (0.91mm) stainless steel. All-welded construction. Exposed surfaces have satin finish. Front of waste receptacle has same degree of arc as other Bobrick contouraSeries washroom accessories. Radius on side edges of waste receptacle complement other contouraSeries accessories. Top edge hemmed and bottom has recessed finger grip. Stainless steel reinforcement straps on back of unit provide strength to the four mounting screw holes
LinerMate™ Trash Liner Holder - Molded plastic sleeve and U-shaped 18-8 S, type-304, 20-gauge (0.91mm) stainless steel support strap hemmed for safety; riveted construction. LinerMate rests inside of waste receptacle area. Removable for servicing
Size: 15-1/8" (385mm) w x 23" (585mm) h x 8-1/2" (215mm) d
Capacity: 12.75-gal. (48.3-L)
Operation: Top edge of waste receptacle is hemmed and bottom has a recessed finger grip for safe handling. The space between bottom of waste receptacle and the floor when unit is properly mounted facilitates floor cleaning. Unit is equipped with LinerMate to accommodate disposable trash liners. LinerMate eliminates unsightly trash liner overhang and facilitates installation and removal of disposable trash liners
To insert disposable trash liner, lift LinerMate up and forward and rest over edge of waste receptacle front panel with the bottom notches of LinerMate engaged on top front edge of receptacle. Place disposable trash liner inside LinerMate and fold disposable trash liner over LinerMate sleeve. Tie a knot in the corner of the bag, then place LinerMate with disposable trash liner back into receptacle. To empty, gather disposable trash liner from LinerMate sleeve and lift bag up
Installation: Mount unit on wall with four sheet-metal screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes and secure with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle bolts or expansion bolts