Bobrick B287 Folding Utility Shelf

SKU: B287
$110.10
Weight: 3.37 LBS
Bobrick

Call us: 1-800-992-3667

FACTORY LEAD TIMES
MAY VARY

Actual products may differ
slightly in appearance
to images shown.

Details

Details

Bobrick model B-287 folding utility shelf is constructed of satin-finished stainless steel


Features

  • Satin-finish stainless steel
  • Easily installed on toilet partition or wall
  • Pull-down shelf returns to upright position when not in use

Specifications

Materials: Shelf - 18-8 S, type-304, 18-gauge (1.2mm) stainless steel. All-welded construction. Exposed surfaces have satin finish. Equipped with heavy-duty internal spring
Mounting Bracket - 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish
Size: 14-9/16 long, 5-3/16" wide (370 x 150mm)
Capacity: 100 lbs (45.36 kg) when properly installed
Operation: Shelf automatically returns to upright position when object is removed
Toilet compartment door cannot be opened when shelf is in use
Installation: Mount unit on wall or toilet partition adjacent to latch side of compartment door with two sheet-metal screws, furnished by manufacturer, at points indicated by an S
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts
For partitions with particle-board or other solid core, secure unit with sheet-metal screws furnished or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which furnished sheet-metal screws can be secured. If two units are installed back-to-back, provide threaded sleeves and machine screws for the full thickness of partition
Note: Provide 5" (125mm) minimum clearance from the inside surface of toilet compartment door to the front edge of shelf to allow door to swing open and close. Provide 14-7/8" (380mm) minimum clearance above the mounting screw holes to the underside of any horizontal projection