Bobrick B306 TrimLine Series Recessed Soap Dispenser

SKU: B306
$160.40
Weight: 3.42 LBS
Bobrick

Call us: 1-800-992-3667

FACTORY LEAD TIMES
MAY VARY

Actual products may differ
slightly in appearance
to images shown.

Details

Details

Stainless steel soap dispenser with satin finish


Features

  • Satin-finish stainless steel
  • Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps
  • Door has 90° return, conceals flange
  • Enclosed plastic soap vessel on back of door swings open for easy filling
  • Full-length hinge and tumbler lock secure door to cabinet
  • Soap refill window
  • Valve operates with less than 5 lb of force (22.2 N)

Specifications

Materials: Recessed Mounting Box - 18-8 S, type-304 stainless steel. All-welded construction. Completely enclosed
Door - 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. 1/4" (6mm) 90° return edges for maximum rigidity
Secured to mounting box with a concealed stainless steel piano-hinge. Equipped with a polycarbonate refill-indicator window and a tumbler lock keyed like other Bobrick washroom accessories
Soap Vessel - Molded plastic. Large opening equipped with plastic cover
Soap Valve - Valve mechanism with O-ring seals. Stainless steel inner spring and spout. Chrome-plated brass housing
Size: 9-1/2" (240mm) w x 5-1/2" (140mm) h x 6-13/16" (170mm) d
Capacity: 45-fl oz (1.3-L)
Operation: Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps. Valve operates with one hand, without tight grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.). Window indicates when refilling is required. Door secured to mounting box unlocks with key provided and swings open 90° for filling without removing from wall
Installation: Provide framed rough wall opening 8-3/8" wide by 4-3/8" high (210 x 110mm). Minimum recessed depth required from finish face of wall is 3-7/8" (98mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. Mount cabinet with shims between framing and cabinet at all points indicated by an S, then secure unit with screws furnished by manufacturer
Note: Place unit as close to top of deck of lavatory as plumbing vent code will permit and with bottom of door high enough to clear fixture trim

Certifications

Barrier-Free Code Compliance: Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)