Bobrick B3474 Classic Series Recessed Combination Unit

SKU: B3474
$341.78
Weight: 19.58 LBS
Bobrick

Call us: 1-800-992-3667

FACTORY LEAD TIMES
MAY VARY

Actual products may differ
slightly in appearance
to images shown.

Details

Details

Stainless steel recessed toilet seat-cover dispenser and toilet tissue dispenser with satin finish


Features

  • Stainless steel throughout with satin finish on all exposed surfaces; welded construction
  • For recessed installation in side wall of single compartment
  • Flanges are one-piece seamless, door secured with full-length stainless steel hinges, and tumbler lock
  • Toilet tissue on the right when facing unit
  • Theft-resistant spindles

Specifications

Materials: Cabinet - 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin finish
Flange - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless construction
Doors - 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. One-piece, seamless construction. Secured to cabinet with a full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories
Toilet Tissue Dispensers - .100" (2.5mm) thick ABS. Equipped with two theft-resistant, heavy-duty, one-piece, molded ABS spindles
Size: 17-3/16" (435mm) w x 30-5/8" (780mm) h x 4-2/16" (100mm) d
Capacity: Toilet-seat-cover dispenser - 500 single- or half-fold paper covers
Toilet Tissue Dispensers: two standard-core toilet tissue rolls up to 5-1/4" (135mm) diameter (1800 sheets)
Operation: Doors unlock with key provided and swing open for filling. Spindles may be removed from cabinet when door is open
Installation: Provide framed rough wall opening 16" wide x 29-1/4" high (405 x 745mm). Minimum recessed depth required from finish face of wall is 4'' (102mm). Top of wall opening should be 43-1/2'' (1105mm) from finish face of floor to allow placement of horizontal grab bar at 33" (840mm) height across front of unit. Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits in wall. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished)

Certifications

Barrier-Free Code Compliance: Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)