Bobrick B353 Classic Series Sanitary Napkin Disposal

SKU: B353
$162.30
Weight: 7.70 LBS
Bobrick

Call us: 1-800-992-3667

FACTORY LEAD TIMES
MAY VARY

Actual products may differ
slightly in appearance
to images shown.

Details

Details

This unit comes with a leak-proof, rigid molded polyethylene waste receptacle that has room over 1.2 gallons or 4.6 liters of waste. It comes with a cabinet that is made with type-304 stainless steel with satin finish


Features

  • Satin-finish stainless steel
  • Seamless beveled flange
  • Door has tumbler lock
  • Self-closing panel covers disposal opening
  • Removable, leak-proof 1.2-gal (4.6-L) plastic receptacle

Specifications

Materials: Cabinet - 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin finish
Flanges - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless construction
Door - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories
Disposal Panel - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Bottom edge hemmed for safety. Secured to door and permanent panel with spring-loaded, full-length stainless steel piano-hinges. Equipped with an international graphic symbol identifying sanitary napkin disposal
Waste Receptacle - Leak-proof, rigid molded polyethylene. Removable for servicing
Operation: Unit is equipped with a self-closing panel covering each disposal opening. Napkin disposal is emptied by opening door with furnished key and removing waste receptacle. Disposable paper liners for the receptacle are available as an optional accessory: order Bobrick Part No. 353-12
Size: 12-3/4" (325mm) w x 17-3/16" (435mm) h x 4-1/8" (103mm) d
Capacity: 1.2-gal. (4.6-L)
Installation: Provide framed rough wall opening 11-1/4" wide x 15-5/8" high (285 x 395mm). Minimum recessed depth required from finish face of wall is 4" (102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then secure unit with four #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished)

Certifications

Barrier-Free Code Compliance: Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)