Bobrick B4369 Contura Series Recessed Combination Unit

SKU: B4369
$349.91
Weight: 18.80 LBS
Bobrick

Call us: 1-800-992-3667

FACTORY LEAD TIMES
MAY VARY

Actual products may differ
slightly in appearance
to images shown.

Details

Details

Stainless steel recessed paper towel dispenser and waste receptacle with TowelMate™ and LinerMate®


Features

  • Satin-finish stainless steel
  • Flush tumbler lock
  • Extends 2-1/2" (65mm) from wall
  • Dispenses 350 C-fold or 475 multifold towels
  • Removable front panel for easy cleaning
  • TowelMate consisting of a 90° return towel guide angle inside cabinet to prevent paper towels form falling out when door is opened for servicing
  • Nylon rod across the center of the towel tray to dispense paper towels one at a time
  • LinerMate can liner holder to facilitate installation and removal of disposable trash liners and retains liner inside waste receptacle

Specifications

Materials: Cabinet - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish
Flange - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Radius on corners and return edges complement corners and edges of door and waste receptacle
Door - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Front of door has same degree of arc as front of waste receptacle and other Bobrick contouraSeries washroom accessories. Radius on corners and edges of door match side edges of waste receptacle and other contouraSeries accessories. Secured to cabinet with a full-length stainless steel piano-hinge. Equipped with a flush tumbler lock keyed like other Bobrick washroom accessories
Paper Towel Dispenser - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Cabinet inside equipped with 90° return towel guide angle to prevent paper towels from falling forward out when door is opened for servicing. Rounded towel tray has hemmed opening to dispense paper towels without tearing. Furnished with internal Towel Mate towel rod to dispense paper towels one at a time without bulging, sagging, bunching or falling thru opening
Towel Mate Towel Rod Assembly - Consisting of a round Nylon Rod and (2) stainless steel Rod Screws for attachment, is field replaceable. Stainless steel Stop Screws (2) lock Towel Mate Towel Rod assembly in place
To retrofit Towel Mate into existing installed units manufactured prior to April 2010 order Towel Mate Accessory Bobrick Part No. 369-130
Waste Receptacle - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Formed, one-piece, seamless construction. Removable front panel has same degree of arc as front of door and other Bobrick contouraSeries washroom accessories. Top edge hemmed for safe handling. Radius on side edges of waste receptacle match corners and edges of paper towel dispenser door and other contouraSeries accessories. Secured to cabinet with two keyholes over studs on bottom and two tamper-resistant setscrews on top
LinerMate Trash Liner Holder - Molded plastic trash liner holder sleeve and U-shaped 18-8 S, type-304, 20-gauge (0.91mm) stainless steel support strap; riveted construction. Molded plastic trash liner holder has arc at front and same shape as inside of waste receptacle area. Removable for servicing
To retrofit LinerMate into existing installed units manufactured prior to December 2009, order LinerMate Accessory Bobrick Part No. 4369-134
Size: 12-3/4" (325mm) w x 28" (710mm) h x 5-6/16" (135mm) d
Capacity: Paper Towel Dispenser: 350 C-fold or 475 multifold paper towels
Waste Receptacle: 3.0-gal. (11.3-L)
Operation: Paper towel dispenser will dispense C-fold or multifold paper towels without adjustment or use of adapters. Cable door-swing limiter prevents damage to washroom accessories and walls. Load paper in towel tray, and then pull one sheet of paper towel over the Towel Mate towel rod and out to conceal rod and start dispense. To insert disposable trash liner, lift LinerMate bag holder up and forward and rest over edge of waste receptacle front panel with the bottom notches of LinerMate engaged on top front edge of receptacle. Place disposable trash liner inside LinerMate and fold disposable trash liner over LinerMate sleeve. Tie a knot in the corner of the disposable trash liner, then place LinerMate with disposable trash liner back into receptacle. To empty, gather disposable trash liner from LinerMate trash liner holder sleeve and lift bag up. Front of waste receptacle panel is removable for cleaning cabinet interior
Installation: Provide framed rough wall opening 11-3/8" wide x 26-5/8" high (290 x 675mm). Minimum recessed depth required to finish face of wall is 4" (102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then secure unit with screws furnished by manufacturer

Certifications

Barrier-Free Code Compliance: Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)