Bobrick B5050 Matrix Series Surface-Mounted Soap Dispenser

SKU: B5050
$41.91
Weight: 1.10 LBS
Bobrick

Call us: 1-800-992-3667

FACTORY LEAD TIMES
MAY VARY

Actual products may differ
slightly in appearance
to images shown.

Details

Details

Grey color surface-mounted soap dispenser for all-purpose hand soaps


Features

  • Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps
  • Impact-resistant polymer
  • Grey color
  • Valve removable for easy maintenance
  • Large-capacity
  • Lid has concealed locking device
  • Concealed wall/mirror mounting
  • Valve operates with less than 5 lb of force (22.2 N)

Specifications

Materials: Container - Durable, impact-resistant grey polymer with high-gloss finish on exposed surfaces. Equipped with a concealed locking device to secure lid; keyed like other Bobrick washroom accessories. Front of container has same degree of arc as front of lid and other Bobrick MatrixSeries washroom accessories. Radius on corners and edges of container complement corners and edges of lid and other MatrixSeries accessories
Valve - Durable, high-impact grey ABS push button and spout with high-gloss finish on exposed surfaces. Soap head-holding capsule valve. Stainless steel spring. U-packing seal and duckbill
Lid - Durable, impact-resistant grey polymer with high-gloss finish on exposed surfaces. Front of lid has same degree of arc as front of container and other Bobrick MatrixSeries washroom accessories. Radius on corners, edges and top of lid complement corners and edges of container and other MatrixSeries accessories
Operation: Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps. Valve is operable with one hand, without tight grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.)
Installation: Provide (3) #10 x 1-1/2" (4.8 x 38mm) sheet-metal mounting screws to mount the container on wall at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle bolts or expansion bolts. For mirrors or glass surfaces, use pressure-sensitive tape strips furnished by manufacturer: clean glass, apply both tape strips horizontally to back of container, press container onto glass surface, then allow the tape to set 24 hours before filling with soap
To fill container, push furnished key down into slot at back of lid and lift off lid. To close the lid, hook bottom front of lid into recessed area located inside top front of container and rotate back of lid toward container. A snap will be heard when the lid is locked
Note: Mount dispenser plumb and true with valve 6" (150mm) to right or left of lavatory center. Provide 6" (150mm) minimum clearance from lid to underside of any horizontal projection for top filling. Push buttons should be located 44" (1120mm) maximum above the finish floor
Capacity: 50-fl oz (1.5-L)
Size: 5-15/16" (150 mm) w x 8-1/16" (205 mm) h x 4" (100 mm) d

Certifications

Barrier-Free Code Compliance: Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)