Bobrick B6857 Satin-Finish Stainless Steel Surface-Mounted Toilet Tissue Dispenser For Single Roll

SKU: B6857
Weight: 0.68 LBS

Call us: 1-800-992-3667


Actual products may differ
slightly in appearance
to images shown.



Surface-Mounted Single Roll Toilet Tissue Dispenser


  • Satin-finish stainless steel
  • Support-arm flanges lock to concealed stainless steel wall plate
  • Chrome-plated plastic spindle holds rolls up to 5-1/2" (140mm) dia. (1800 sheets)
  • Theft-Resistant Spindle (Part No. 283-604) available as replacement part


Materials: Flanges and Support Arms - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Concealed, 16-gauge (1.6mm) stainless steel mounting bracket is welded inside each flange. Secured to wall plates with stainless steel setscrews
Concealed Wall Plates - 18-8 S, type-304, 16-gauge (1.6mm) stainless steel
Spindle - Chrome-plated plastic. Equipped with heavy-duty internal spring
Size: 7-1/4" (185mm) w x 2" (50mm) h x 3-5/16" (85mm) d
Capacity: One standard-core toilet tissue roll up to 5-1/2" (140mm) diameter (1800 sheets)
Installation: To remove concealed wall plates from back of flanges and mounting brackets, loosen setscrews. Mount each wall plate with prongs at top; secure with sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting brackets onto prongs of wall plate, then secure into position by tightening setscrews at bottom of flanges
Note: Center-to-center of concealed wall plates must be within 1/16" (1.6mm) of dimension shown
For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers
For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts


Barrier-Free Code Compliance: Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)