Bobrick B708-115V Surface-Mounted AirGuard Automatic Hand Dryer

SKU: B708-115V
$550.80
Weight: 30.91 LBS
Bobrick

Call us: 1-800-992-3667

FACTORY LEAD TIMES
MAY VARY

Actual products may differ
slightly in appearance
to images shown.

Details

Details

White surface-mounted automatic hand dryer


Features

  • Vitreous enamel cast iron cover
  • White color
  • 115V AC, 20 Amp, 2400 Watts, 50/60 Hz, cULus Listed
  • Limited warranty: motor brushes for 3 years; all other parts for 10 years
  • Automatic hand dryers should be installed 15" (380mm) above any projection or horizontal surface which may interfere with the operation of the automatic sensor

Specifications

Materials: Cover - One-piece, minimum 1/8" (3mm) thick, grey iron-casting is finished in high-gloss, acid-resistant, multicoat vitreous enamel. Equipped with a two-position, self-returning, chrome-plated air-outlet nozzle. Air-inlet and -outlet openings are equipped with vandal-resistant grilles. Cover is secured to mounting base with two concealed, vandal-resistant, recessed hex-screws
Mounting Base - 14-gauge (2mm) plated steel with four 19/64"' (8mm) diameter mounting holes
Motor - Universal, 1/10 hp, 6200 rpm, on resilient mounting. Sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end. Equipped with automatic thermal-overload switch
Fan - Dynamically balanced, single-inlet centrifugal fan is mounted on motor shaft; directs airflow through heating element at 150 cfm
Heating Element - Coiled nickel-chrome heating element is mounted in mica frame and protected by an automatic thermal overload switch. Heating element, which is located on inlet side of fan, heats air without hot spots — inaccessible to vandals
Electronic Control - Infrared sensor automatically turns dryer on when hands or self-returning nozzle are held under air outlet opening and across path of sensor. Remove hands or release self-returning nozzle from path of sensor and dryer stops
Electronic sensor has automatic shutoff approximately 1-1/2 minutes after dryer turns on if inanimate object is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally
Size: 13-3/16" (335mm) w x 10-5/16" (260mm) h x 7-1/2" (190mm) d
Warranty: 10-Year Limited Warranty
Operation: No-touch operation: electronic sensor automatically turns dryer on when hands or self-returning nozzle are held under air-outlet opening and across path of sensor. Two-position nozzle is adjustable to direct airflow: up position directs airflow down for hand drying and down position directs airflow up for face drying. After drying face, release nozzle and it automatically returns to up position. Remove hands or release self-returning nozzle from path of sensor and dryer stops. Dryer will not stop by itself before user is satisfied hands or face are dry. Dryer operates only when actually drying hands or face, which saves energy and operating costs. Electronic sensor will automatically shut dryer off 1-1/2 minutes after dryer turns on if inanimate object, such as tape or chewing gum, is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally
Installation: Wall Preparation:
Secure mounting base on wall using template provided. For masonry walls, provide four 1/4" (6mm) expansion shields or anchors and secure with #14 sheet-metal screws (not furnished). For plaster or dry wall construction, provide concealed backing to comply with local building codes and secure with #14 x 2-3/4" (6.3 x 70mm) or longer round-head sheet-metal screws or 1/4" (6mm) toggle bolts (not furnished). Provide electrical service from nearest distribution panel to dryer mounting base in conformance with local electrical codes
Wiring Instructions:
Connect ground wire to ground terminal marked , the black or hot wire to terminal marked L1, and neutral or white wire to terminal marked N. A DEDICATED LINE IS REQUIRED FOR EACH 115-VOLT INSTALLATION
Notes: Electronic sensor in AutoPilot dryers will pick up movement within 7-1/2" (190mm) of air-outlet nozzle. Use caution when choosing location for AutoPilot dryers in confined areas. Consider proximity to doorways and other traffic areas
Bobrick automatic hand dryers should be installed 15" (380mm) above any projection or horizontal surface which may interfere with the operation of the automatic sensor

Certifications

UL: cULs Listed
VDE: VDE Approved
EU Directives: Complies with ROHS and CE Marked