Pemko CFM83 Continuous Geared Hinge Full-Mortise Clear Anodized Finish - 83"

Weight: 1.00 LBS


Call us: 1-800-992-3667

All Products Sold Per Each.

Actual products may differ
slightly in appearance
to images shown.



Select Options Below



Pemko CFM83 Continuous Geared Hinge Full-Mortise Clear Anodized Finish, Pemko's standard duty anodized aluminum Full Mortise units are designed mainly for new door applications. Also available in heavy duty models

Buy Pemko Continous Geared Hinges @ Quiality Door & Hardware Inc , We are a GSA Contract Holder & Distributer Of Quality Made Commercial Door Hardware For Assa Abloy !


Features Pemko CFM83 Hinges 

  • Fasteners are No. 12-24 x 7/16" FHUC, Type C, threadforming, no tapping required
  • Applied to conceal both leaves
Some Benifits Of Using Pemko Continous Hinges  
    • With a continuous hinge, typical alignment problems (such as door sag and binding) are eliminated.
    • The continuous hinge distributes load stress uniformly along the full length of the door and frame.
    • The gear design of the continuous hinge ensures symmetrical operation of each leaf.
    • 1/2 lb. or less operating force required to operate most doors, regardless of size.
    • Low operating force feature makes continuous hinges ideal for doors used by the physically challenged.
    • The continuous hinge acts as reinforcement for both door and frame.
    • A high degree of security can be achieved for exterior openings or restricted spaces by using a continuous hinge. With the geared construction and the full-length channel cap, the common gap between the door and frame is sealed, which provides security against prying.
    • In addition, the closing of this gap protects against pinching fingers in doors in public areas, particularly those where children are present.
    • Sight proof design of the continuous hinge provides privacy for lavatories, executive offices, or file rooms.
    • PemkoHinge has increased critical stress points of the leaf extrusions, which provides additional strength and rigidity to the completed product.
    • PemkoHinge has a new bearing design which eliminates premature wear, guarantees proper alignment, and requires fewer bearings to carry more weight. This new bearing is produced for Pemko using a chemical composition and injection process that provides a stronger, more accurately formed bearing.
    • PemkoHinge is designed with inter-meshing gear segments in the hinge which provide 50% more bearing surface. With more bearing surface, less wear results.
    • PemkoHinge also goes through the anodizing process after completing all machining. This means the machined aluminum surfaces that are in direct contact with the bearing have a smoother, harder surface, thereby reducing wear.
    • PemkoHinge maintains uniform bearing spacing the full length of the hinge even when lengths exceed 10 ft.
    • PemkoHinge uses #12-24 size fasteners instead of #10. (#12 Tek fasteners available upon request).
    • PemkoHinge commercial models are ideal for use on lead lined doors (i.e. hospital X-ray rooms), without requiring special screw locations.

Specifications Pemko CFM83 Continous Hinges 

Finish: C - Clear Anodized
Length: 83"
Width: 25/32" (19.8 mm)
Height: 2-9/16" (65.1 mm)
Manufacturer: Pemko


BHMA: BHMA Certified
UL: Fire Rated - UL10C - Positive Pressure
Other Certifications: PemkoHinge Fire Rating - UL76Y2 Distributors for Pemko 

Manufacturer Spec

This file is currently not available.

Download it here instead

Finishes Chart

Product Substitutions

You may also be interested in the following product(s)