Skip to content
All PEMKO Products

Pemko CFM83HD1 Continuous Geared Hinge Full-Mortise Heavy Duty Clear Anodized Finish - 83" Fire Rated - UL10C - Positive Pressure

  • SKU: CFM83HD1_

Pemko CFM83HD1 Continuous Geared Hinge Full-Mortise Heavy Duty Clear Anodized Finish - 83" Fire Rated - UL10C - Positive Pressure

  • SKU: CFM83HD1_
Sale price$208.80/ea
In Stock
In Stock
Visa Mastercard American Express Discover Shop Pay Apple Pay

Pemko Continuous Hinge - CFM83 HD-1 

The Pemko CFM83HD1 Continuous Geared Hinge Full-Mortise Heavy Duty Clear Anodized Finish Fire Rated - UL10C - Positive Pressure was designed mainly for new door applications and helps to eliminate alignment problems such as door sag and binding. A high degree of security can be achieved for exterior openings or restricted spaces by using a continuous hinge. With the geared construction and the full-length channel cap, the common gap between the door and frame is sealed, which provides security against prying.

Features:

  • Fasteners are No. 12-24 x 7/16" FHUC, Type C, thread forming, no tapping required
  • Applied to conceal both leaves
  • The continuous hinge distributes load stress uniformly along the full length of the door and frame.
  • The gear design of the continuous hinge ensures the symmetrical operation of each leaf.
  • 1/2 lb. or less operating force is required to operate most doors, regardless of size.
  • The low operating force feature makes continuous hinges ideal for doors used by the physically challenged.
  • The continuous hinge acts as reinforcement for both the door and frame.
  • In addition, the closing of this gap protects against pinching fingers indoors in public areas, particularly those where children are present.
  • The sight-proof design of the continuous hinge provides privacy for lavatories, executive offices, or file rooms.
  • PemkoHinge has increased critical stress points of the leaf extrusions, which provides additional strength and rigidity to the completed product.
  • PemkoHinge has a new bearing design that eliminates premature wear, guarantees proper alignment, and requires fewer bearings to carry more weight. This new bearing is produced for Pemko using a chemical composition and injection process that provides a stronger, more accurately formed bearing.
  • PemkoHinge is designed with inter-meshing gear segments in the hinge which provide 50% more bearing surface. With a more bearing surface, less wear results.
  • PemkoHinge also goes through the anodizing process after completing all machining. This means the machined aluminum surfaces that are in direct contact with the bearing have a smoother, harder surface, thereby reducing wear.
  • PemkoHinge maintains uniform bearing spacing the full length of the hinge even when lengths exceed 10 ft.
  • PemkoHinge uses #12-24 size fasteners instead of #10. (#12 Tek fasteners available upon request).
  • PemkoHinge commercial models are ideal for use on lead-lined doors (i.e. hospital X-ray rooms), without requiring special screw locations.

Finish: C - Clear Anodized
Length: 83"
Width: 25/32" (19.8 mm)
Height: 2-9/16" (65.1 mm)
Weight Bearing 540 lbs
Manufacturer: Pemko

BHMA: BHMA Certified
UL: Fire Rated - UL10C - Positive Pressure
Other Certifications: PemkoHinge Fire Rating - UL76Y2

Continuous Hinge Handing Chart

Recently viewed