Pemko CFM83HD1-HT Continuous Geared Hinge Full-Mortise Heavy Duty Hospital Tip Clear Anodized Finish - 83"

SKU: CFM83HD1HT
$151.60
Weight: 10.00 LBS
Pemko

Call us: 1-800-992-3667

FACTORY LEAD TIMES
MAY VARY

Actual products may differ
slightly in appearance
to images shown.

Details

Details

The Pemko CFM83HD1-HT Continuous Geared Hinge Full-Mortise Heavy Duty Hospital Tip Clear Anodized Finish, Pemko's CFM83HD-1-HT Hospital Tip heavy duty anodized aluminum Full Mortise units are designed mainly for new door applications

 

Features Pemko CFM83HD-1HT Continous Hinge 

  • Fasteners are No. 12-24 x 7/16" FHUC, Type C, threadforming, no tapping required
  • Applied to conceal both leaves
  • With a continuous hinge, typical alignment problems (such as door sag and binding) are eliminated.
  • The continuous hinge distributes load stress uniformly along the full length of the door and frame.
  • The gear design of the continuous hinge ensures symmetrical operation of each leaf.
  • 1/2 lb. or less operating force required to operate most doors, regardless of size.
  • Low operating force feature makes continuous hinges ideal for doors used by the physically challenged.
  • The continuous hinge acts as reinforcement for both door and frame.
  • A high degree of security can be achieved for exterior openings or restricted spaces by using a continuous hinge. With the geared construction and the full-length channel cap, the common gap between the door and frame is sealed, which provides security against prying.
  • In addition, the closing of this gap protects against pinching fingers in doors in public areas, particularly those where children are present.
  • Sight proof design of the continuous hinge provides privacy for lavatories, executive offices, or file rooms.
  • PemkoHinge has increased critical stress points of the leaf extrusions, which provides additional strength and rigidity to the completed product.
  • PemkoHinge has a new bearing design which eliminates premature wear, guarantees proper alignment, and requires fewer bearings to carry more weight. This new bearing is produced for Pemko using a chemical composition and injection process that provides a stronger, more accurately formed bearing.
  • PemkoHinge is designed with inter-meshing gear segments in the hinge which provide 50% more bearing surface. With more bearing surface, less wear results.
  • PemkoHinge also goes through the anodizing process after completing all machining. This means the machined aluminum surfaces that are in direct contact with the bearing have a smoother, harder surface, thereby reducing wear.
  • PemkoHinge maintains uniform bearing spacing the full length of the hinge even when lengths exceed 10 ft.
  • PemkoHinge uses #12-24 size fasteners instead of #10. (#12 Tek fasteners available upon request).
  • PemkoHinge commercial models are ideal for use on lead lined doors (i.e. hospital X-ray rooms), without requiring special screw locations.

Specifications CFM83-HD1-HT Continous Heavy Duty Commerial Door Hinge By Pemko 

Finish: C - Clear Anodized
Length: 83"
Width: 25/32" (19.8 mm)
Height: 2-9/16" (65.1 mm)
Manufacturer: Pemko

Certifications Pemko CFM83HD1-HT Hospital Tip Continous Hinge 

BHMA: BHMA Certified
UL: Fire Rated - UL10C - Positive Pressure
Other Certifications: PemkoHinge Fire Rating - UL76Y2
 
Quality Door & Hardware Inc Distributors Of Pemko Door Hardware < Assa Abloy Quality Made Products ! 
 

Manufacturer Spec

This file is currently not available.

Download it here instead

Finishes Chart

Product Substitutions

You may also be interested in the following product(s)