Rixson 380 Half Mortise Offset Top Pivot

All Rixson pivots and pivot sets shall be of one manufacturer. All Rixson heavy duty pivots shall have a minimum of 2 bearings internal to the bottom pivot. One shall be a thrust bearing and the other a needle bearing. Separate bearing surfaces shall be in the top pivot. Lead-lined door units and high traffic pivots shall have additional thrust bearing. Fire rated pivot sets shall have steel top pivots. Rixson Fire rated doors require steel intermediate pivots

Rixson 380 Half Mortise Offset Top Pivot

Comercial Door Hardware Manufactured By Rixson a Assa Abloy Owned Co 

Buy Rixson Pivots , Pivot Sets , Door Pivots, @ www.QualityDoor.com

Features Rixson 380 Half Mortise Offset Top Pivot

• Flush door and frame application only
• Optional top pivot where door portion cannot be mortised
• Designed for channel iron door frames with aluminum, hollow metal or wood doors
• Available for fire door assemblies (ferrous material) – specify F380
• Door portion from L180 pivot is available if lead-lined doors are used – specify L380 and door thickness
• Non-ferrous base material
• 3/4" (19mm) offset (measured from centerline of pivot to face of door)
• Furnished with wood and machine screws
• Available with longer than standard pivot pins. Increments are 1/4" (6mm), 1/2" (13mm), 3/4" (19mm) only

Specifications Rixson 380 Half Mortise Offset Top Pivot

Rixson Door Pivots , Pivot Sets , Top Pivots 

Certifications Rixson 380 Half Mortise Offset Top Pivot