Rixson F27 NHO Fire Rated LAP (Less All Parts) Single-Acting 3/4" Offset Hung Floor Closer - Weight Up To 450 lbs.

SKU: F27LAP
$535.06
Weight: 1.00 LBS
Rixson

FACTORY LEAD TIMES
MAY APPLY IF QUICK
SHIP TRUCK NOT SHOWN

Call us: 1-800-992-3667

All Products Sold Per Each.

Actual products may differ
slightly in appearance
to images shown.

 

 

Select Options Below

Details

Details

Floor closers shall be heavy-duty model 27 (offset). All closers shall be handed. Choose appropriate functions and strengths to accommodate lead lining, extra high traffic, fire rating, independently hung or quick install models. These closers shall ave separate and independent checking valves, to control latch speed, closing speed and adjustable hydraulic backcheck. All single acting closers shall have a built in dead stop feature. All closers have one piece spindle assembly. Extra heavy-duty closers shall have minimum of two thrust bearings and one needle bearing. Closers shall not have compression spring

Rixson F27 Floor Closers , Commercial Door Hardware, Floor Closers, Pivots, Pivot sets, Quality Made Door Hardware.

Handing Chart


Features, Rixson Floor Closer F27 Non Hold Open , Door Closers, Pivots, Pivot Sets, 

  • Built-in positive dead stop prevents door from swinging beyond the desired opening degree
  • Separate and independent valves for closing speed, latch speed and backcheck
  • Available non-hold open (N) or selective hold open (S) at same degree as dead stop
  • Delayed action option (Non-hold open closers only)
  • Models available to meet ICC/ANSI 117.1 low opening force requirements
  • Cold weather fluid available
  • Sealed closer option
  • Available with floor plate or thresholdinstallation
  • Available 1-1/2" offset, for doors with cladding or frames with applied molding, maximum door weight 250 lbs
  • Cycolac, rustproof cement case
  • Vertical door adjustment
  • Standard top pivot: #180 included
  • Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot
  • For fire rated openings (up to 3 hour assemblies). This package will be supplied with a steel top pivot (F180) and a non-hold open closer
  • Fire rated closers cannot have PH option
  • For 20-minute labeled doors
  • Furnished with wood and machine screws
  • Extended spindles available in 1/2" increments up to 2" longer than standard

 Specifications For Rixson F27 NHO , Heavy Duty Floor Closer, Commercial Door Hardware, Door Pivots, Pivots, Pivot Sets , Door Closers

Application: Exterior or Interior Doors
Handing: Left-hand (LH) & Right-hand (RH)
Door Width: Door Width up to 4'0" (1219mm)
Door Height: Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot
Weight: Up to 450 lbs
Warranty: 10 Years Limited Warranty
Manufacturer: Rixson

 Certifications Rixson F27 Non Hold Open , Floor Closer, Heavy Duty Closer, Commercial Grade 1 Door Hardware 

Distributed By Quality Door & Hardware Inc , A GSA Contract Holder 

ANSI: 156.4 C06041/C06051

Manufacturer Spec

This file is currently not available.

Download it here instead