Rixson L147 Offset Pivot Set Heavy Weight For Doors Up To 800 LB, 48" Door Widths. The L147 Pivot Set Comes with Top And Bottom Pivot. Handed.
- Exterior or Interior Doors
- Lead-Lined/Heavy/High Traffic Doors
- Weight to 800 lbs.
- Door Width up to 4'0" (1219mm)
- Handed
- Heavy Weight Pivot Set
- Standard top pivot L180 included
- ML19 intermediate pivot required (order separately)
- Bottom pivot mounts directly to the floor
- Doors with lead lining under the skin should also use this product.
- Screw holes in the top pivot and bottom arm spaced to straddle lead lining in the middle of the door
- Available for fire door assemblies up to three hours for 1-3/4" (44mm) doors only (ferrous material) – specify FL147. Intermediate pivot required by UL. Specify FML19 (order separately)
- For the 20-minute label suffix “–20” to the part number
- Non-ferrous base material
- Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
- Available to accommodate lead indoor thicknesses 1-3/4" (44mm), 2" (51mm), 2-1/4" (57mm), 2-1/2" (64mm), or 3" (76mm) – specify when ordering
- 3/4" (19mm) offset (measured from the centerline of the pivot to the face of the door)
- Door edges must be beveled 1/8" in 2"
- Furnished with wood and machine screws
- Extended spindles are available in 1/2" (13mm) increments up to 2" (51mm) longer than standard
- Doors will swing 180°, trim permitting