Rixson L27 LAP (Less All Parts) Single-Acting 3/4" Offset Hung Floor Closer for Lead Lined, Heavy Weight, or High Traffic Doors - Weight Up To 1500 lbs.

SKU: L27SHOLAP
$807.24
Weight: 30.00 LBS
Rixson

FACTORY LEAD TIMES
MAY APPLY IF QUICK
SHIP TRUCK NOT SHOWN

Call us: 1-800-992-3667

All Products Sold Per Each.

Actual products may differ
slightly in appearance
to images shown.

 

 

Select Options Below

Details

Details

All Rixson Floor closers shall be handed. Choose appropriate functions and strengths to accommodate lead lining, extra high traffic, fire rating, independently hung or quick install models. These Floor closers shall ave separate and independent checking valves, to control latch speed, closing speed and adjustable hydraulic backcheck. All single acting closers shall have a built in dead stop feature. All Rixson closers have one piece spindle assembly. Extra heavy-duty closers shall have minimum of two thrust bearings and one needle bearing. Rixson Floor Closers shall not have compression spring

Rixson Commercial Grade 1 Floor Closer, L27 LAP , Quality Made Institutional Floor Closers , Door Hardware, By Rixson 

Handing Chart


Features For , Rixson L27 Less All Parts, Heavy Duty , Floor Closers. Commercial Door Closers, Pivots, Pivots Sets.

  • Available for the following lead-lined door thicknesses: 1-3/4"(44mm), 2" (51mm), 2-1/4" (57mm), 2-1/2" (63mm) or 3" (76mm)
  • Additional thrust bearing for greater load capacity
  • Built-in positive dead stop prevents door from swinging beyond the desired opening degree
  • Separate and independent valves for closing speed, latch speed and backcheck
  • Available non-hold open (N) or selective hold open (S) at same degree as dead stop
  • Delayed action option
  • Models available to meet ICC/ANSI A117.1 low opening force requirements
  • Cold weather fluid option
  • Sealed closer option
  • Available with floor plate or threshold installation
  • For extended offsets, consult factory
  • Cast iron cement case
  • Vertical door adjustment
  • Intermediate pivot(s) required
  • Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot
  • For fire rated openings (up to 3 hour assemblies). This package will be supplied with steel top pivot (FL180) and non-hold open closer. Note: UL listing for
    1-3/4" thick doors only
  • Fire rated closers cannot have PH option
  • For 20-minute labeled doors
  • Furnished with wood and machine screws
  • Extended spindles available in 1/2" increments up to 2" longer than standard

Specifications For Rixson L27 Lap , Commercial Door Hardware, Door Pivots, Pivots , Pivot Sets, Door Closers, Floor Closers, By Rixson

Application: Exterior or Interior Doors, Lead-Lined/Heavy/High Traffic Doors
Handing: Left-hand (LH) & Right-hand (RH)
Door Width: Door Width up to 4'0" (1219mm)
Weight: Up to 1500 lbs
Warranty: 10 Years Limited Warranty
Manufacturer: Rixson

Certifications Rixson L27 Lap , Floor Closer, Commercial Door Closers, Distributed By Quality Door & Hardware Inc, Experience The Difference Quality Makes !

ANSI: 156.4 C06071

Manufacturer Spec

This file is currently not available.

Download it here instead