Rixson Q27 LAP (Less All Parts) Non-Hold Open Single-Acting 3/4" Offset Hung Floor Closer - Weight Up To 450 lbs.

SKU: Q27LAPNHO
$832.96
Weight: 1.00 LBS
Rixson

FACTORY LEAD TIMES
MAY APPLY IF QUICK
SHIP TRUCK NOT SHOWN

Call us: 1-800-992-3667

All Products Sold Per Each.

Actual products may differ
slightly in appearance
to images shown.

 

 

Select Options Below

Details

Details

Rixson Q27 LAP Floor closers shall be heavy-duty Rixson Q27 LAP model 27 (offset). All closers shall be handed. Choose appropriate functions and strengths to accommodate lead lining, extra high traffic, fire rating, independently hung or quick install models. These Rixson Floor closers Q27LAPshall ave separate and independent checking valves, to control latch speed, closing speed and adjustable hydraulic backcheck. All single acting closers shall have a built in dead stop feature. All closers have one piece spindle assembly. Extra heavy-duty Rixson Floor Closers shall have minimum of two thrust bearings and one needle bearing. Closers shall not have compression spring

Rixson Door Hardware, Commercial Door Hardware, Manufactured By Rixson, Q27 LAP Floor Closers, Door Pivots, Pivot Sets, Heavy Duty Door Hardware.

Handing Chart


 Features For Rixson Q27 Less All Parts Floor Closers, Grade 1 Door Closers, Commercial Door Hardware.

  • Built-in positive dead stop prevents door from swinging beyond the desired opening degree
  • Separate and independent valves for closing speed, latch speed and backcheck
  • Available non-hold open (N) or selective hold open (S) at same degree as dead stop
  • Delayed action option (Non-hold open closers only)
  • Models available to meet ICC/ANSI 117.1 low opening force requirements
  • Cold weather fluid available
  • Sealed Rixson closer option
  • Available with floor plate or thresholdinstallation
  • Available 1-1/2" offset, for doors with cladding or frames with applied molding, maximum door weight 250 lbs
  • Cycolac, rustproof cement case
  • Vertical door adjustment
  • Standard top pivot: #180 included
  • Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot
  • For fire rated openings (up to 3 hour assemblies). This package will be supplied with a steel top pivot (F180) and a non-hold open closer
  • Fire rated closers cannot have PH option Rixon Floor Closers.
  • For 20-minute labeled doors
  • Furnished with wood and machine screws
  • Extended spindles available in 1/2" increments up to 2" longer than standard
  • Rixson Floor Closers, Commercial Door Hardware

 Specifications Rixson Q27 LAP Floor Closers, Pivots, Pivot Sets , Quality Made Floor Closers

Rixson Floor Closers, Distributed By Quality Door And Hardware Inc , A GSA Contract Holder.

Application: Exterior or Interior Doors
Handing: Left-hand (LH) & Right-hand (RH)
Door Width: Door Width up to 4'0" (1219mm)
Door Height: Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot
Weight: Up to 450 lbs
Warranty: 10 Years Limited Warranty
Manufacturer: Rixson

Certifications Q27 LAP Floor Closers, Manufactured By Rixson 

Quality Door & Hardware Proud Distributors Of Rixson Brand Door  Hardware, Door Closers, Floor Closers, Pivots and Pivot Sets.

ANSI: 156.4 C06041/C06051

Manufacturer Spec

This file is currently not available.

Download it here instead